Bespoke Rock and Roll Bed Frames
At Dymond Engineering we primarily supply Rock and Roll bed frames to businesses which carry out camper van conversions and installation.
Rock and Roll Bed Frames from Dymond, including our very own Eezee Glide!
Let the Frame take the Strain
Rock and Roll EeZee Glide Bed Frames from Dymond, offer a heavy duty, easy glide, wheeled track system which is designed for both ease and safety of use. Because the Eezee Glide is assisted by our air ram and metal roller bearings you will find the frame easy to operate with just one handle.
Safety and Strength as Standard
Safety and strength is always front of mind and so the frame is made of heavy duty steel box section and has a double latch pin locking system which locks either side of the frame. Of course the Dymond Eezee Glide Rock and Roll Bed is engineered and made in our factory in North Devon, because we support British manufacturing.
The bed has been designed to fit a VW Transporter van conversion and measures 2000 x 1100 when extended flat. We can however adapt the frame to fit other vans of similar size.
The EeZee Glide is very similar to the M1-tested Rock and Roll bed frame we make on behalf of camper van conversion businesses, but the Eezee Glide frame design has not been tested. This product has seat-belt points but seat-belts are not provided.
Camper Van Comfort and Convenience
An absolute ‘must-have’ for any camper van conversion, Rock and Roll beds allow the rear 2 car seats in your camper van to easily convert into a bed frame for sleeping.
A Rock and Roll bed gives you a comfortable night’s sleep and then folds easily back into seating for travel, and it’s the perfect space saving device complete with large under-seat storage area. It’s an essential piece of kit for any van that’s being converted for camping and sleeping in. Take a look at the video below showing the frame in operation.
Seat locks securely in upright position, ready for the journey
Frame glides effortlessly with use of a single handle
Air ram and metal bearings give an easy glide transition
Let the frame take the strain for a great night’s sleep!
Heavy duty, easy glide, wheeled track system for ease of operation
Double latch pin locking system secures the seat in place
Metal roller bearings help you glide the frame from seat to bed
Heavy duty steel box section tube gives strength and durability
But – as well as our own Dymond Eezee Glide bed frame – we also custom make bespoke bed frames to your specification. We can make for any van, including: Volkswagen Transporter, Ford Transit, Renault Trafic, Fiat Ducato, Fiat Talento, Nissan NV300 or Vauxhall Vivaro, Mercedes Sprinter & vito, and Mazda Bongo.
The minimum production quantity for bespoke frames is 10. Contact us for a quote on 01271 372662.
Features and Benefits of the Dymond EeZee Glide Rock and Roll Beds:
- Heavy duty, easy glide, wheeled track system for safety and ease of operation when changing between seat and bed.
- Operates with a single handle, locking on either side of the frame.
- Double latch pin locking system.
- Manufactured from heavy duty steel box section tube, making them strong and durable but not too heavy.
- The EeZee Glide is very similar to the M1-tested Rock n Roll bed frame we make for camper van conversion businesses, but the Eezee Glide frame design has not been tested.
- This product has seat-belt points but seat-belts are not provided.
- Heavy duty metal anchor points.
- Powder coated in your choice of colour from the RAL range.
- Large under-seat storage area.
- The base measures 920mm x 760mm.
- When seated, the frame measures 1140 x 1100mm.
- When laid flat, the bed measures 2000 x 1100mm.
We were delighted with the service we experienced from Dymond Engineering for our brand-new store fit-out in Romford Essex. We decided on an industrial look and theme with a modern twist and once we found the look we wanted, we then went looking for a manufacturer to produce our floor and wall display units and…
After struggling for months with trying to get my metal staircase compliant with building regs I called Dymond engineering. Within minutes of them being here they had come up with a solution that not only passed but exceeded all expectations. Fantastic company, great staff, amazing workmanship, super efficient service, highly recommended.
When looking for someone to assist in designing new concept shopfitting for our next 500 stores I had no hesitation in turning to a team I have used previously with great success. Jonathan Loader and Colin Dymond complement one another, with Jonathan providing well considered and effective design input, which Colin translates into practical yet…
Having used Dymond Engineering for the metalwork on a previous job, when we needed a metal fabricator for our Wembley Park Market job we chose Dymond. Not only do they specialise in metal shopfittings, they also submitted a competitive price and deadline. We presented the concept and drawings to Dymond who then helped us to…
One of the great things when working with Dymond is they have always understood our brief, given their advice on how best to achieve it, told us what they are going to do and then delivered what they promised. They provide invaluable input into the design and functionality of the shop fittings we require; advising…
We at Calendar Club have enjoyed working with Dymond and the team since 2004. They have helped us re-engineer many of our existing fittings, as well as developing new fixtures. This has resulted in a flexible system which enables us to build one of our seasonal units in any location to the required specification in…
Hills Design have been working with Dymond for nearly 20 years in the design, development and supply of metal based retail display equipment. On every project we have received an instant understanding and buy-in of our creative ideas and solutions. This is followed by the usual sensible interpretation into what is best relative to manufacturing…
For more than 20 years Dymond have supplied us with innovative solutions at competitive prices, often within tight time scales. Dymond Engineering work hard to understand a client’s needs and repeatedly deliver above our expectations. They value engineer in accordance with the market and application, and apply considerable expertise within both areas. Over the period…
Condor Cycles are one of the UK’s leading manufacturers of bespoke bicycles. Using the latest innovation in Italian designed frames, their meticulous attention to detail means they have led the field in custom cycles for over 60 years. Having operated from their store in Central London for 10 years they decided to purchase the adjacent…
This season we have started using the Dymond Engineering Partridge Feeders. They are well built weighing some 25kg empty, thus not blowing around. They are 100% water tight, suitable for the Exmoor wind and rain. Holding approximately 60kg of compound pelleted feed, they enable keepers to fill only in favourable weather, say on a twice…